Hyundai Excavator Face Seals in North Carolina - Our establishment offers a wide selection of various aftermarket parts and accessories for all manufacturers of excavators, loaders, and bulldozers. Our organization is equipped with a wide selection of differing purchasing choices and will accomodate nearly all shipping requests within North Carolina.
Hyundai IC Forklifts
Inspect a Forklift
Based on OSHA and HRSDC statistics, there are approximately 10,000 forklift-related worklplace injuries each year in North America. Some injuries result from the lack of proper equipment inspection and maintenance of the machine. Other injuries are because of operator error.
Injuries are not the only problems which are related to the operation and maintenance of forklifts. One more serious issue is damage to property. Forklift accidents can lead to damage to overhead pipes, sprinklers, and other machines and building walls. By completing thorough inspections on a daily basis, you can help lessen forklift injuries.
When starting an inspection, turn the engine off. Check the levels of the fuel, engine oil, hydraulic oil, coolant and brake fluid. Visually inspect the tires of the machine looking for indications of wear, correct air pressure and general condition. Visually check the forks on the front of the equipment too. Confirm the condition of the top-clip retaining pin and heel. Check that the backrest is attached firmly. Confirm that the finger guard and overhead are attached. Visually check the stops and cables, the mast chains and the hydraulic hoses as well.
You should inspect the propane tank if you are using LP or liquid propane forklifts. Check for any signs of rust, corrosion or damage. Be sure that the battery has adequate levels of electrolyte and which is charged sufficiently. Visually check all belts. Check to confirm the location of the owner's instruction manual and make sure it is situated in the designated on-board storage compartment. Confirm the hood latch and confirm that it is operating as it is supposed to. Inspect the seatbelt and make certain it latches securely and is working properly.
After doing the above steps, turn the engine on. Carefully listen to the engine. Investigate any strange sounds immediately. Make sure that both the parking brake and the service brake are correctly functioning. Make certain that the accelerator and the steering controls are operating at optimum performance levels.
The forklift is used most frequently to keep the flow of operations running as efficiently and smoothly as possible. Even though forklifts are a large investment, the injuries they reduce from heavy lifting and the amount of man hours they could save could make the purchase pay for itself in little time.
There are numerous different units and manufacturers of forklifts on the market. Different models are designed to accomplish various tasks. So as to make sure that you don't purchase the wrong type of equipment or buy more than you require, it is essential to evaluate the requirements of your business and compare to the different models on the market. Talking to a authorized forklift distributor is a great idea and so is doing your own research on the internet.
When looking at forklifts by the kind of fuel, the following types are available:
Electric: The electric forklift is run by lead-acid based rechargeable batteries. These large and heavy batteries could run a machine for more than 5 or 6 straight hours. Electric models are great for indoor applications because of their lack of emissions. They are a popular option for warehouses and retail spaces since they put zero emissions into the air where individuals are working and provide a relatively low cost per hour of operation.
Internal Combustion: IC forklifts work with a range of fuels. Several units take compressed natural gas or CNG, others take diesel, LP or liquid propane or gasoline. When compared to electric forklifts, the IC or internal combustion units are easier to refuel, accelerate faster and can carry heavier loads. These models are typically more expensive to operate compared to their electric counterparts.
Fuel Cell: The newest in forklift technology is the Hydrogen fuel cell. These models provide the fast refueling capability of an IC model but provide the zero emissions and quietness of electric forklifts.
